Weight: | 16.8 (37) kg (lbs) |
---|---|
Dimensions: | 242 x 133 x 437 mm, l x w x d |
Input Power: | 120 or 220/48-62 volts/Hz |
Output: | 15 volts |
Display Type: | 1/4 VGA LCD w/touchscreen |
Humidity: | 0 to 80% RH, noncondensing |
Temperature: | 0 to 40 deg C |
Communications: | RS232, RS422, RS485, Ethernet |
Conformity to Norms: | EN61000-6-1, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN 61010-1 |
Modes: | Manual, Programmed, Setpoint |
Output: | 0-55 current (A) |
Outputs

Control a single TSP/NEG with one output on the back panel of the Digitel (pictured) or remote TSP/NEG.
Outputs

Control two TSP/NEG's using dual outputs on the back of the DIGITEL (pictured) or remote TSP/NEG.
Outputs

Use the Digitel TSPe to interface with a remote TSP/NEG controller over long distances.
Input Voltage

110-volt, US Connector
Input Voltage

220-volt, US Connector
Input Voltage

230-volt, European Connector
Input Voltage

230-volt, United Kingdom Connector
Input Voltage

230-volt, Australian Connector
Serial Port

Standard RS232 Protocol
Serial Port

Standard RS422 Protocol
Serial Port

Standard RS485 Protocol (Half Duplex)
Serial Port

Standard ethernet communications and browser support.
Serial Port

Standard RS485 Protocol (Full Duplex)
Remote HVE

Select to control high voltage or TSP using alternate controller set-points
Remote HVE

High voltage or TSP can be controlled by alternate controller set-points
TSP Control

Select Remote TSP/NEG control to add TSP/NEG control harware
TSP Control

Interface with a remote TSP/NEG controller over long distances.
TSP Control

Interface with a dual remote TSP/NEG controller over long distances.
Specifications
Downloads
- TSPe Specification Sheet
- TSPe NRTL Certification
- TSPe CE Declaration of Conformity
- TSP/TSPe Controller Users Manual (pdf)